SBC SBC-770 Bedienungsanleitung

KINO-QM770 Mini-ITX SBC Page iUser Manual KINO-QM770 MODEL: Mini-ITX SBC with 3rd Generation 22nm Intel® Mobile CPUUp to 8.0 GB DDR3, DVI, HDMI, LV

KINO-QM770 Mini-ITX SBCPage x Figure 3-27: TPM Connector Location...

KINO-QM770 Mini-ITX SBCPage 86  Enabled If selected, the following appears with values that can be selected: *Wake up every day *Wake up date *Wak

KINO-QM770 Mini-ITX SBC Page 87 Security Device Support [Disable] Use the Security Device Support option to configure support for the TPM.  Disab

KINO-QM770 Mini-ITX SBCPage 88  Max CPU Speed: Lists the maximum CPU processing speed.  Min CPU Speed: Lists the minimum CPU processing speed. 

KINO-QM770 Mini-ITX SBC Page 895.3.5 SATA Configuration Use the SATA Configuration menu (BIOS Menu 7) to change and/or set the configuration of the

KINO-QM770 Mini-ITX SBCPage 90 5.3.6 Intel(R) Rapid Start Technology Use the Intel(R) Rapid Start Technology menu to configure Intel® Rapid Start Te

KINO-QM770 Mini-ITX SBC Page 91Aptio Setup Utility – Copyright (C) 2011 American Megatrends, Inc. Advanced Intel Trusted Execution Te

KINO-QM770 Mini-ITX SBCPage 92  Intel AMT [Enabled] Use Intel AMT option to enable or disable the Intel® AMT function.  Disabled Intel® AMT is d

KINO-QM770 Mini-ITX SBC Page 93 USB Devices The USB Devices Enabled field lists the USB devices that are enabled on the system  Legacy USB Suppo

KINO-QM770 Mini-ITX SBCPage 94 5.3.10.1 Serial Port n Configuration Use the Serial Port n Configuration menu (BIOS Menu 13) to configure the serial

KINO-QM770 Mini-ITX SBC Page 95 IO=3F8h; IRQ=3, 4 Serial Port I/O port address is 3F8h and the interrupt address is IRQ3, 4  IO=2F8h; IRQ=3, 4 S

KINO-QM770 Mini-ITX SBC Page xiFigure 6-5: Chipset Driver Read Me File ...

KINO-QM770 Mini-ITX SBCPage 96  IO=2E8h; IRQ=3, 4 Serial Port I/O port address is 2E8h and the interrupt address is IRQ3, 4 5.3.10.1.3 Serial Por

KINO-QM770 Mini-ITX SBC Page 975.3.11 F81866 H/W Monitor The F8186 H/W Monitor menu (BIOS Menu 14) shows the operating temperature, fan speeds and s

KINO-QM770 Mini-ITX SBCPage 98 o +V1.5 o VCC3V o VSB3V o VBAT 5.3.11.1 Smart Fan Mode Configuration Use the Smart Fan Mode Configuration submenu

KINO-QM770 Mini-ITX SBC Page 99 SYS Fan Smart Fan Control [Auto Duty-Cycle Mode] Use the SYS_FAN1 Smart Fan Control option to configure the Syste

KINO-QM770 Mini-ITX SBCPage 100 Aptio Setup Utility – Copyright (C) 2011 American Megatrends, Inc. Advanced COM1 Console Redirection

KINO-QM770 Mini-ITX SBC Page 101Aptio Setup Utility – Copyright (C) 2011 American Megatrends, Inc. Advanced iEi Feature Auto Recover

KINO-QM770 Mini-ITX SBCPage 102 Aptio Setup Utility – Copyright (C) 2011 American Megatrends, Inc. Main Advanced Chipset Boot Security Save &am

KINO-QM770 Mini-ITX SBC Page 1035.4.1 PCH-IO Configuration Use the PCH-IO Configuration menu (BIOS Menu 19) to configure the PCH chipset. Aptio Se

KINO-QM770 Mini-ITX SBCPage 104  Disabled Disable internal HDMI codec for High Definition Audio  Enabled DEFAULT Enable internal HDMI codec for H

KINO-QM770 Mini-ITX SBC Page 105 VT-d [Enabled] Use the VT-d option to enable or disable VT-d support.  Disabled Disables VT-d support.  Enable

KINO-QM770 Mini-ITX SBCPage xii List of Tables Table 1-1: Technical Specifications...

KINO-QM770 Mini-ITX SBCPage 106  PEG0 – Gen X [Gen1] Use the PEG0 – Gen X option to configure PEG0 B0:D1:F0. The following options are available:

KINO-QM770 Mini-ITX SBC Page 107 DVI  LVDS  HDMI 2  HDMI 1  LCD Panel Type [By Hardware] Use the LCD Panel Type option to select the type o

KINO-QM770 Mini-ITX SBCPage 108 5.4.2.2 Memory Configuration Use the Memory Configuration submenu (BIOS Menu 22) to view memory information. Aptio

KINO-QM770 Mini-ITX SBC Page 109 Bootup NumLock State [On] Use the Bootup NumLock State BIOS option to specify if the number lock setting must be

KINO-QM770 Mini-ITX SBCPage 110  Option ROM Messages [Force BIOS] Use the Option ROM Messages option to set the Option ROM display mode.  Force B

KINO-QM770 Mini-ITX SBC Page 1115.6 Security Use the Security menu (BIOS Menu 24) to set system and user passwords. Aptio Setup Utility – Copyright

KINO-QM770 Mini-ITX SBCPage 112 Aptio Setup Utility – Copyright (C) 2011 American Megatrends, Inc. Main Advanced Chipset Boot Security Save &

KINO-QM770 Mini-ITX SBC Page 113 6 Software Drivers Chapter 6

KINO-QM770 Mini-ITX SBCPage 114 6.1 Available Software Drivers NOTE: The content of the CD may vary throughout the life cycle of the product and is

KINO-QM770 Mini-ITX SBC Page 115 Figure 6-1: Introduction Screen Step 3: Click KINO-QM770. Step 4: A new screen with a list of available drivers a

KINO-QM770 Mini-ITX SBC Page xiiiTable 3-28: TPM Connector Pinouts...

KINO-QM770 Mini-ITX SBCPage 116 Step 5: Install all of the necessary drivers in this menu. Step 0: 6.3 Chipset Driver Installation To install the

KINO-QM770 Mini-ITX SBC Page 117 Figure 6-4: Chipset Driver License Agreement Step 9: The Read Me file in Figure 6-5 appears. Step 10: Click Next t

KINO-QM770 Mini-ITX SBCPage 118 Step 11: Setup Operations are performed as shown in Figure 6-6. Step 12: Once the Setup Operations are complete, cli

KINO-QM770 Mini-ITX SBC Page 119 Figure 6-7: Chipset Driver Installation Finish Screen 6.4 Graphics Driver Installation To install the Graphics driv

KINO-QM770 Mini-ITX SBCPage 120 Figure 6-8: Graphics Driver Welcome Screen Step 6: The License Agreement in Figure 6-9 appears. Step 7: Click Yes

KINO-QM770 Mini-ITX SBC Page 121Step 9: Once the Setup Operations are complete, click Next to continue. Figure 6-10: Graphics Driver Setup Operati

KINO-QM770 Mini-ITX SBCPage 122 6.5 LAN Driver Installation Step 1: Right-click the Computer button from the start menu and select Properties. (Fi

KINO-QM770 Mini-ITX SBC Page 123Step 4: A list of system hardware devices appears (Figure 6-14). Step 5: Right-click the Ethernet Controller that

KINO-QM770 Mini-ITX SBCPage 124 Figure 6-15: Update Driver Software Window Step 8: Select “Browse my computer for driver software” and click NEXT

KINO-QM770 Mini-ITX SBC Page 125 Figure 6-17: LAN Driver Installation Step 12: The Finish screen in Figure 6-18 appears. Click Close to exit. Ste

KINO-QM770 Mini-ITX SBCPage xiv BIOS Menus BIOS Menu 1: Main ...

KINO-QM770 Mini-ITX SBCPage 126 Step 2: Click “Audio” and select the folder which corresponds to the operating system. Step 3: Double click the se

KINO-QM770 Mini-ITX SBC Page 127 Figure 6-20: Audio Driver Software Configuration Step 8: After the driver installation process is complete, a conf

KINO-QM770 Mini-ITX SBCPage 128 Step 9: The confirmation screen offers the option of restarting the computer now or later. For the settings to take

KINO-QM770 Mini-ITX SBC Page 129 Figure 6-23: SATA RAID Driver License Agreement Step 9: The Read Me file in Figure 6-24 appears. Step 10: Click Ne

KINO-QM770 Mini-ITX SBCPage 130 Figure 6-25: SATA RAID Driver Setup Operations Step 13: The Finish screen in Figure 6-26 appears. Step 14: Select “

KINO-QM770 Mini-ITX SBC Page 1316.8 USB 3.0 Driver Installation WARNING: Do not run this driver’s installer (Setup.exe) from a USB storage device (

KINO-QM770 Mini-ITX SBCPage 132 Step 7: Read the License Agreement. Step 8: Click Yes to continue. Figure 6-28: USB 3.0 Driver License Agreement

KINO-QM770 Mini-ITX SBC Page 133Step 11: Setup Operations are performed as shown in Figure 6-30. Step 12: Once the Setup Operations are complete, cl

KINO-QM770 Mini-ITX SBCPage 134 6.9 Intel® AMT Driver Installation The package of the Intel® AMT components includes  Intel® Management Engine Int

KINO-QM770 Mini-ITX SBC Page 135 Figure 6-32: Intel® ME Driver Welcome Screen Step 6: The license agreement in Figure 6-33 appears. Step 7: Read t

KINO-QM770 Mini-ITX SBC Page 1Chapter 1 1 Introduction

KINO-QM770 Mini-ITX SBCPage 136 Figure 6-34: Intel® ME Driver Setup Operations Step 11: The Finish screen in Figure 6-35 appears. Step 12: Select “

KINO-QM770 Mini-ITX SBC Page 137Appendix A A BIOS Options

KINO-QM770 Mini-ITX SBCPage 138 Below is a list of BIOS configuration options in the BIOS chapter. 　 BIOS Information ...

KINO-QM770 Mini-ITX SBC Page 139　 VT-d [Enabled]...

KINO-QM770 Mini-ITX SBCPage 140 Appendix B B Terminology

KINO-QM770 Mini-ITX SBC Page 141AC ’97 Audio Codec 97 (AC’97) refers to a codec standard developed by Intel® in 1997. ACPI Advanced Configuration an

KINO-QM770 Mini-ITX SBCPage 142 DMA Direct Memory Access (DMA) enables some peripheral devices to bypass the system processor and communicate direct

KINO-QM770 Mini-ITX SBC Page 143LCD Liquid crystal display (LCD) is a flat, low-power display device that consists of two polarizing plates with a l

KINO-QM770 Mini-ITX SBCPage 144 Appendix C C Digital I/O Interface

KINO-QM770 Mini-ITX SBC Page 145C.1 Introduction The DIO connector on the KINO-QM770 is interfaced to GPIO ports on the Super I/O chipset. The DIO h

KINO-QM770 Mini-ITX SBCPage 2 1.1 Introduction Figure 1-1: KINO-QM770 The KINO-QM770 is a Mini-ITX SBC with a 3rd generation 22nm Intel® mobile CPU

KINO-QM770 Mini-ITX SBCPage 146 C.2 Assembly Language Sample 1 MOV AX, 6F08H ;setting the digital port as input INT 15H ; AL low byte = valu

KINO-QM770 Mini-ITX SBC Page 147Appendix D D Hazardous Materials Disclosure

KINO-QM770 Mini-ITX SBCPage 148 D.1 Hazardous Materials Disclosure Table for IPB Products Certified as RoHS Compliant Under 2002/95/EC Without Mercu

KINO-QM770 Mini-ITX SBC Page 149Toxic or Hazardous Substances and Elements Part Name Lead (Pb) Mercury (Hg) Cadmium(Cd) Hexavalent Chromium(CR(VI))

KINO-QM770 Mini-ITX SBCPage 150 此附件旨在确保本产品符合中国 RoHS 标准。以下表格标示此产品中某有毒物质的含量符合中国 RoHS 标准规定的限量要求。 本产品上会附有”环境友好使用期限”的标签，此期限是估算这些物质”不会有泄漏或突变”的年限。本产品可能包含有较

KINO-QM770 Mini-ITX SBC Page 31.2 Benefits Some of the KINO-QM770 motherboard benefits include:  Low power consumption  Wide range of I/O interf

KINO-QM770 Mini-ITX SBCPage 4 1.4 Connectors The connectors on the KINO-QM770 are shown in the figure below. Figure 1-2: Connectors

KINO-QM770 Mini-ITX SBC Page 51.5 Dimensions The main dimensions of the KINO-QM770 are shown in the diagram below. Figure 1-3: Dimensions (mm)

KINO-QM770 Mini-ITX SBCPage ii Revision Date Version Changes September 25, 2014 1.02 Modified Section 4.6.4: Display Mode Selection December 7, 20

KINO-QM770 Mini-ITX SBCPage 6 1.6 Data Flow Figure 1-4 shows the data flow between the system chipset, the CPU and other components installed on the

KINO-QM770 Mini-ITX SBC Page 71.7 Technical Specifications KINO-QM770 technical specifications are listed in Table 1-1. Specification KINO-QM770 Fo

KINO-QM770 Mini-ITX SBCPage 8 Serial Ports Two RS-232 COM connectors (one by pin header, one on rear side) One RS-422/485 COM connector (4-pin wafer

KINO-QM770 Mini-ITX SBC Page 9Chapter 2 2 Packing List

KINO-QM770 Mini-ITX SBCPage 10 2.1 Anti-static Precautions WARNING! Static electricity can destroy certain electronics. Make sure to follow the ESD

KINO-QM770 Mini-ITX SBC Page 112.3 Packing List NOTE: If any of the components listed in the checklist below are missing, do not proceed with the i

KINO-QM770 Mini-ITX SBCPage 12 Quantity Item and Part Number Image 1 One Key Recovery CD 1 Quick installation guide Table 2-1: Packing List 2.

KINO-QM770 Mini-ITX SBC Page 13Item and Part Number Image Infineon TPM module (P/N: TPM-IN01-R11) DVI-VGA Adaptor (P/N: 33Z00-000031-RS) SATA to

KINO-QM770 Mini-ITX SBCPage 14 Chapter 3 3 Connector Pinouts

KINO-QM770 Mini-ITX SBC Page 153.1 Peripheral Interface Connectors Section 3.1.1 shows peripheral interface connector locations. Section 3.1.2 lists

KINO-QM770 Mini-ITX SBC Page iiiCopyright COPYRIGHT NOTICE The information in this document is subject to change without prior notice in order to im

KINO-QM770 Mini-ITX SBCPage 16 3.1.2 Peripheral Interface Connectors The table below shows a list of the peripheral interface connectors on the KINO

KINO-QM770 Mini-ITX SBC Page 17Connector Type Label SPI Flash connector 8-pin header JSPI1 SPI Flash connector (EC) 8-pin header JSPI2 TPM con

KINO-QM770 Mini-ITX SBCPage 18 CN Pinouts: See Table 3-3 This connector connects to speaker, microphone and audio input connectors on the front pan

KINO-QM770 Mini-ITX SBC Page 19 CN Label: BAT1 CN Type: 2-pin wafer CN Location: See Figure 3-3 CN Pinouts: See Table 3-4 This is connected to th

KINO-QM770 Mini-ITX SBCPage 20 Figure 3-4: Digital I/O Connector Location Pin Description Pin Description 1 GND 2 +V5S 3 Output 3 4 Output 2 5 O

KINO-QM770 Mini-ITX SBC Page 21 Figure 3-5: BIOS Debug Port Location Pin Description Pin Description 1 EC_EPP_STB# 2 EC_EPP_AFD# 3 EC_EPP_PD0 4 NC

KINO-QM770 Mini-ITX SBCPage 22 Figure 3-6: CPU Fan Connector Location Pin Description 1 GND 2 +V12S 3 Rotation Signal 4 PWM Control Signal Table

KINO-QM770 Mini-ITX SBC Page 23 Figure 3-7: System Fan Connector Location Pin Description 1 Rotation Signal 2 +12V 3 GND Table 3-8: System Fan Con

KINO-QM770 Mini-ITX SBCPage 24 Figure 3-8: Front Panel Connector Location Pin Description Pin Description 1 NC 6 PWR_LED+ 2 PWR_BTN+ 7 PWR_L

KINO-QM770 Mini-ITX SBC Page 25 Figure 3-9: Infrared Connector Location Pin Description 1 VCC (+5V) 2 NC 3 IR-RX 4 GND 5 IR-TX Table 3-10: Infrared

KINO-QM770 Mini-ITX SBCPage iv Table of Contents 1 INTRODUCTION...

KINO-QM770 Mini-ITX SBCPage 26 Figure 3-10: Keyboard/Mouse Connector Location Pin Description 1 VCC5_KBMS 2 Mouse Data 3 Mouse Clock 4 Keyboard Da

KINO-QM770 Mini-ITX SBC Page 27 Figure 3-11: LVDS Connector Location Pin Description Pin Description 1 GROUND 2 GROUND 3 LVDS_A_TX0-P 4 LVDS_A_T

KINO-QM770 Mini-ITX SBCPage 28 3.2.11 LVDS Backlight Connector CN Label: INVERTER1 CN Type: 5-pin wafer CN Location: See Figure 3-12 CN Pinouts: Se

KINO-QM770 Mini-ITX SBC Page 29CN Pinouts: See Table 3-14 The PCIe Mini card slot enables a PCIe Mini card expansion module to be connected to the b

KINO-QM770 Mini-ITX SBCPage 30 Pin Description Pin Description 27 GND 28 1.5V 29 GND 30 SMBCLK 31 PETN2 32 SMBDATA 33 PETP2 34 GND 35 GND

KINO-QM770 Mini-ITX SBC Page 31 Figure 3-14: PCIe x16 Slot Location Pin Description Pin Description Pin Description Pin Description A1 Name A22 H

KINO-QM770 Mini-ITX SBCPage 32 Pin Description Pin Description Pin Description Pin Description A19 GND A40 HSIn(5) A61 HSIn(10) A82 GND A20 RSVD A

KINO-QM770 Mini-ITX SBC Page 333.2.14 Power Button (On-board) CN Label: PWR_SW1 CN Type: Push button CN Location: See Figure 3-15 Push the on-board

KINO-QM770 Mini-ITX SBCPage 34 Figure 3-16: Power Connector Location Pin Description Pin Description 1 Ground 2 Ground 3 +12V 4 +12V Table 3-17:

KINO-QM770 Mini-ITX SBC Page 35 Figure 3-17: RS-232 Serial Port Connector Location Pin Description Pin Description 1 -NDCD2 6 -NCTS2 2 -NDSR2

KINO-QM770 Mini-ITX SBC Page v3.2.11 LVDS Backlight Connector ... 28 3.2.12

KINO-QM770 Mini-ITX SBCPage 36 Figure 3-18: RS-422/485 Serial Port Connector Location Pin Description 1 RXD422- 2 RXD422+ 3 TXD422+/TXD485+ 4 TXD4

KINO-QM770 Mini-ITX SBC Page 37CN Pinouts: See Table 3-21 The SATA connectors connect to SATA hard drives or optical drives with data transfer speed

KINO-QM770 Mini-ITX SBCPage 38 The SATA connectors connect to SATA hard drives or optical drives with data transfer speeds as high as 3Gb/s. Figure

KINO-QM770 Mini-ITX SBC Page 39 Figure 3-21: SATA Power Connector Locations Pin Description 1 +V12S 2 GND 3 GND 4 +V5S Table 3-23: SATA Power Conne

KINO-QM770 Mini-ITX SBCPage 40 Figure 3-22: SMBus Connector Location Pin Description 1 GND 2 SMB_DATA 3 SMB_CLK 4 +V5S Table 3-24: SMBus Connector

KINO-QM770 Mini-ITX SBC Page 41 Figure 3-23: SO-DIMM Connector Locations 3.2.23 SPDIF Connector CN Label: SPDIF1 CN Type: 5-pin header CN Locatio

KINO-QM770 Mini-ITX SBCPage 42 PIN DESCRIPTION 3 SPDIFOUT 4 GND 5 SPDIFIN Table 3-25: SPDIF Connector Pinouts 3.2.24 SPI Flash Connector CN L

KINO-QM770 Mini-ITX SBC Page 43Pin Description 8 NC Table 3-26: SPI Flash Connector Pinouts3.2.25 SPI Flash Connector (EC) CN Label: JSPI2 CN Type:

KINO-QM770 Mini-ITX SBCPage 44 3.2.26 TPM Connector CN Label: TPM1 CN Type: 20-pin header CN Location: See Figure 3-27 CN Pinouts: See Table 3-28

KINO-QM770 Mini-ITX SBC Page 453.2.27 USB 2.0 Connectors CN Label: USB1, USB2 CN Type: 8-pin header CN Location: See Figure 3-28 CN Pinouts: See

KINO-QM770 Mini-ITX SBCPage vi 4.6.2 Clear CMOS...

KINO-QM770 Mini-ITX SBCPage 46 3.3 External Interface Connectors Figure 3-29 shows the KINO-QM770 motherboard external interface connectors. The KIN

KINO-QM770 Mini-ITX SBC Page 47 Figure 3-30: Audio Jacks 3.3.2 DVI Connector CN Label: VIDEO1 CN Type: DVI connector CN Location: See Figure 3-29 C

KINO-QM770 Mini-ITX SBCPage 48 Pin Description Pin Description V8 VS V23 DVI_Clock + V9 Data 1- V24 DVI_Clock - Table 3-30: DVI Connector Pinout

KINO-QM770 Mini-ITX SBC Page 49LED Description LED Description A on: linked blinking: data is being sent/received B off: 10 Mb/s green: 100 Mb/s o

KINO-QM770 Mini-ITX SBCPage 50 Pin Description Pin Description 5 GND 17 GND 6 HDMI_DATA1# 18 +5V 7 HDMI_DATA0 19 HDMI_HPD 8 GND 20 HDMI_GND 9 HDM

KINO-QM770 Mini-ITX SBC Page 513.3.6 Serial Port Connector (COM1) CN Label: COM1 CN Type: DB-9 CN Location: See Figure 3-29 CN Pinouts: See Table 3

KINO-QM770 Mini-ITX SBCPage 52 Chapter 4 4 Installation

KINO-QM770 Mini-ITX SBC Page 534.1 Anti-static Precautions WARNING: Failure to take ESD precautions during installation may result in permanent dam

KINO-QM770 Mini-ITX SBCPage 54 WARNING: The installation instructions described in this manual should be carefully followed in order to prevent dam

KINO-QM770 Mini-ITX SBC Page 554.3 CPU, CPU Cooling Kit and SO-DIMM Installation WARNING: A CPU should never be turned on without the specified coo

KINO-QM770 Mini-ITX SBC Page vii5.3.6 Intel(R) Rapid Start Technology... 90 5.3.

KINO-QM770 Mini-ITX SBCPage 56 WARNING: When handling the CPU, only hold it on the sides. DO NOT touch the pins at the bottom of the CPU. Step 1:

KINO-QM770 Mini-ITX SBC Page 57Step 5: Align the CPU pins. Carefully align the CPU pins with the holes in the CPU socket. Step 6: Insert the CPU.

KINO-QM770 Mini-ITX SBCPage 58 Step 1: Install the support bracket. Remove the tape from the support bracket. From the solder side of the board, al

KINO-QM770 Mini-ITX SBC Page 59 Figure 4-4: Align the Cooling Kit Step 4: Place the cooling kit onto the CPU. Push down the fan with some pressure

KINO-QM770 Mini-ITX SBCPage 60 Figure 4-5: Secure the Cooling Kit 4.4 SO-DIMM Installation To install a SO-DIMM, please follow the steps below and

KINO-QM770 Mini-ITX SBC Page 61Step 2: Align the SO-DIMM with the socket. Align the SO-DIMM so the notch on the memory lines up with the notch on t

KINO-QM770 Mini-ITX SBCPage 62 4.6 Jumper Settings NOTE: A jumper is a metal bridge that is used to close an electrical circuit. It consists of

KINO-QM770 Mini-ITX SBC Page 634.6.1 AT/ATX Mode Selection Jumper Label: J_ATXCTL1 Jumper Type: 3-pin header Jumper Settings: See Table 4-2 Jumper

KINO-QM770 Mini-ITX SBCPage 64 Jumper Location: See Figure 4-9 If the KINO-QM770 fails to boot due to improper BIOS settings, the clear CMOS jumper

KINO-QM770 Mini-ITX SBC Page 654.6.3 Clear ME RTC Registers Jumper Label: ME_RTC1 Jumper Type: 3-pin header Jumper Settings: See Table 4-4 Jumper L

KINO-QM770 Mini-ITX SBCPage viii C.3 ASSEMBLY LANGUAGE SAMPLE 2... 146 D HAZA

KINO-QM770 Mini-ITX SBCPage 66 Jumper Location: See Figure 4-11 Sets the external DVI-I connector as an analog CRT connector or a DVI connector. P

KINO-QM770 Mini-ITX SBC Page 67Setting Description Short 1-2 Disabled (Default) Short 2-3 Enabled Table 4-6: Flash Descriptor Security Override Ju

KINO-QM770 Mini-ITX SBCPage 68 Figure 4-13: LVDS Voltage Selection Jumper Location 4.6.7 LVDS Resolution Selection Jumper Label: J_PID1 Jumper Typ

KINO-QM770 Mini-ITX SBC Page 69Pin Description 5-6 & 7-8 1920 X 1080 (48bit) 1-2 & 5-6 & 7-8 1920 X 1200 (48bit) 3-4 & 5-6 & 7

KINO-QM770 Mini-ITX SBCPage 70 Figure 4-15: PCIe Channel Mode Selection Jumper Location 4.7 Chassis Installation 4.7.1 Airflow WARNING: Airflow is

KINO-QM770 Mini-ITX SBC Page 714.8 Internal Peripheral Device Connections This section outlines the installation of peripheral devices to the onboar

KINO-QM770 Mini-ITX SBCPage 72 4.8.2 Single RS-232 Cable (w/o Bracket) The single RS-232 cable consists of one serial port connector attached to a s

KINO-QM770 Mini-ITX SBC Page 734.9 External Peripheral Interface Connection Devices can be connected to the external connectors. To install external

KINO-QM770 Mini-ITX SBCPage 74 4.9.2 DVI Display Device Connection The KINO-QM770 has a single female DVI-I connector on the external peripheral int

KINO-QM770 Mini-ITX SBC Page 754.9.3 HDMI Display Device Connection The HDMI connector transmits a digital signal to compatible HDMI display devices

KINO-QM770 Mini-ITX SBC Page ixList of Figures Figure 1-1: KINO-QM770 ...

KINO-QM770 Mini-ITX SBCPage 76 Step 1: Locate the RJ-45 connectors. The locations of the USB connectors are shown in Chapter 3. Step 2: Align the

KINO-QM770 Mini-ITX SBC Page 77 Figure 4-22: USB Connector 4.10 Intel® AMT Setup Procedure The KINO-QM770 is featured with the Intel® Active Managem

KINO-QM770 Mini-ITX SBCPage 78 NOTE: To change the password, enter a new password following the strong password rule (containing at least one upper

KINO-QM770 Mini-ITX SBC Page 79Chapter 5 5 BIOS

KINO-QM770 Mini-ITX SBCPage 80 5.1 Introduction The BIOS is programmed onto the BIOS chip. The BIOS setup program allows changes to certain system s

KINO-QM770 Mini-ITX SBC Page 81Key Function Esc Main Menu – Quit and do not save changes into CMOS Status Page Setup Menu and Option Page Setup Me

KINO-QM770 Mini-ITX SBCPage 82 5.2 Main The Main BIOS menu (BIOS Menu 1) appears when the BIOS Setup program is entered. The Main menu gives an over

KINO-QM770 Mini-ITX SBC Page 83 System Time [xx:xx:xx] Use the System Time option to set the system time. Manually enter the hours, minutes and se

KINO-QM770 Mini-ITX SBCPage 84 5.3.1 ACPI Configuration The ACPI Configuration menu (BIOS Menu 3) configures the Advanced Configuration and Power In

KINO-QM770 Mini-ITX SBC Page 855.3.2 RTC Wake Settings The RTC Wake Settings menu (BIOS Menu 4) configures RTC wake event. Aptio Setup Utility – Cop