SBC SBC-381H Spezifikationen

NOVA-945GSE 5.25” SBC Page 1NOVA-945GSE 5.25” SBC NOVA-945GSE5.25” SBC with 1.6 GHz Intel® Atom™ N270 ProcessorLVDS/VGA/HDTV, Dual PCIe Mini, Dua

NOVA-945GSE 5.25” SBCPage 10 98H5.5.2 CF Card Setup ...

NOVA-945GSE 5.25” SBCPage 100 5.6.2 Motherboard Installation To install the NOVA-945GSE motherboard into the chassis please refer to the reference m

NOVA-945GSE 5.25” SBC Page 101connects to a microphone. The remaining two audio jacks, Line-In and Line-Out, connect to two speakers. To install the

NOVA-945GSE 5.25” SBCPage 102 NOVA-945GSE and branches into two cables that are each connected to a PS/2 connector, one for a mouse and one for a ke

NOVA-945GSE 5.25” SBC Page 103chassis. Step 5: Connect the keyboard and mouse. Once the PS/2 connectors are connected to the chassis, a keyboard an

NOVA-945GSE 5.25” SBCPage 104 Step 3: Secure the bracket. The single RS-232 connector has two retention screws that must be secured to a chassis or

NOVA-945GSE 5.25” SBC Page 105Step 3: Connect the cable to the SATA disk. Connect the connector on the other end of the cable to the connector at t

NOVA-945GSE 5.25” SBCPage 106 WARNING: If the USB pins are not properly aligned, the USB device can burn out. Step 2: Align the connectors. The ca

NOVA-945GSE 5.25” SBC Page 107 RJ-45 Ethernet cable connectors To install these devices, connect the corresponding cable connector from the actual

NOVA-945GSE 5.25” SBCPage 108 6 AMI BIOS Chapter 6

NOVA-945GSE 5.25” SBC Page 1096.1 Introduction A licensed copy of AMI BIOS is preprogrammed into the ROM BIOS. The BIOS setup program allows users t

NOVA-945GSE 5.25” SBC Page 11132H6.3.8 USB Configuration... 52

NOVA-945GSE 5.25” SBCPage 110 F1 key General help, only for Status Page Setup Menu and Option Page Setup Menu F2 /F3 key Change color from total 1

NOVA-945GSE 5.25” SBC Page 1116.2 Main The Main BIOS menu (864H815HBIOS Menu 1) appears when the BIOS Setup program is entered. The Main menu gives

NOVA-945GSE 5.25” SBCPage 112 o Size: Lists memory size The System Overview field also has two user configurable fields:  System Time [xx:xx:xx]

NOVA-945GSE 5.25” SBC Page 113 BIOS Menu 2: Advanced 6.3.1 CPU Configuration Use the CPU Configuration menu (873H825HBIOS Menu 3) to view detailed C

NOVA-945GSE 5.25” SBCPage 114 The CPU Configuration menu (826HBIOS Menu 3) lists the following CPU details:  Manufacturer: Lists the name of the C

NOVA-945GSE 5.25” SBC Page 115 Compatible DEFAULT Configures the on-board ATA/IDE controller to be in compatible mode. In this mode, a SATA channel

NOVA-945GSE 5.25” SBCPage 116 The IDE Configuration menu (876H828HBIOS Menu 4) allows changes to the configurations for the IDE devices installed in

NOVA-945GSE 5.25” SBC Page 117 Vendor: Lists the device manufacturer  Size: List the storage capacity of the device.  LBA Mode: Indicates whet

NOVA-945GSE 5.25” SBCPage 118 Device. These include, but are not limited to:  ZIP  LS-120  LBA/Large Mode [Auto] Use the LBA/Large Mode option

NOVA-945GSE 5.25” SBC Page 119 PIO Mode [Auto] Use the PIO Mode option to select the IDE PIO (Programmable I/O) mode program timing cycles between

NOVA-945GSE 5.25” SBCPage 12 163HF HAZARDOUS MATERIALS DISCLOSURE... 552H192 164HF.1 HAZARDOUS MATE

NOVA-945GSE 5.25” SBCPage 120  MWDMA0 Multi Word DMA mode 0 selected with a maximum data transfer rate of 4.2MBps  MWDMA1 Multi Word DMA mode

NOVA-945GSE 5.25” SBC Page 121 Auto DEFAULT BIOS auto detects HDD SMART support.  Disabled Prevents BIOS from using the HDD SMART feature.  E

NOVA-945GSE 5.25” SBCPage 122  Parallel Port Address [378] Use the Parallel Port Address option to select the parallel port base address.  Disabl

NOVA-945GSE 5.25” SBC Page 123 Parallel Port IRQ [IRQ7] Use the Parallel Port IRQ selection to set the parallel port interrupt address.  IRQ5 I

NOVA-945GSE 5.25” SBCPage 124  Disabled No base address is assigned to Serial Port 2  2F8/IRQ3 DEFAULTSerial Port 2 I/O port address is 3F8 an

NOVA-945GSE 5.25” SBC Page 125 10 Serial port 3 IRQ address is 10  11 DEFAULT Serial port 3 IRQ address is 11  Select RS232 or RS485/RS422 [RS

NOVA-945GSE 5.25” SBCPage 126 BIOS Menu 7: Hardware Health Configuration  CPU FAN Mode Setting [Full On Mode] Use the CPU FAN Mode Setting option

NOVA-945GSE 5.25” SBC Page 127When the CPU FAN Mode Setting option is in the PWM Manual Mode, the following parameters can be set.  CPU Fan PWM

NOVA-945GSE 5.25” SBCPage 128 starts, it rotates using the starting pulse width modulation (PWM) specified in the Fan 3 Start PWM option below. To s

NOVA-945GSE 5.25” SBC Page 129The following system parameters and values are shown. The system parameters that are monitored are:  System Temperat

NOVA-945GSE 5.25” SBC Page 13List of Figures 165HFigure 1-1: NOVA-945GSE...

NOVA-945GSE 5.25” SBCPage 130 BIOS Menu 8: Power Configuration 6.3.6 APM Configuration The APM Configuration menu (833HBIOS Menu 9) allows the adva

NOVA-945GSE 5.25” SBC Page 131BIOS Menu 9:Advanced Power Management Configuration  Restore on AC Power Loss [Last State] Use the Restore on AC Pow

NOVA-945GSE 5.25” SBCPage 132  Suspend When the power button is pressed the system goes into suspend mode  Resume on Keyboard/Mouse [Disabled]

NOVA-945GSE 5.25” SBC Page 133 Resume On RTC Alarm [Disabled] Use the Resume On RTC Alarm option to specify the time the system should be roused f

NOVA-945GSE 5.25” SBCPage 134 BIOS Menu 10: Remote Access Configuration [Advanced]  Remote Access [Disabled] Use the Remote Access option to enab

NOVA-945GSE 5.25” SBC Page 135 Serial Port Number [COM1] Use the Serial Port Number option allows to select the serial port used for remote access

NOVA-945GSE 5.25” SBCPage 136 Use the Redirection After BIOS POST option to specify when console redirection should occur.  Disabled The console

NOVA-945GSE 5.25” SBC Page 137 BIOS Menu 11: USB Configuration  USB Functions [Enabled] Use the USB Function option to enable or disable the USB c

NOVA-945GSE 5.25” SBCPage 138 Normally if this option is not enabled, any attached USB mouse or USB keyboard does not become available until a USB c

NOVA-945GSE 5.25” SBC Page 139 BIOS Menu 12: Trusted Computing  TCG/TPM Support [No] Use the TCG/TPM Support option to configure support for the T

NOVA-945GSE 5.25” SBCPage 14 193HFigure 4-11: Front Panel Connector Pinout Locations (8-pin) ...582H67 194HFigure 4-12:

NOVA-945GSE 5.25” SBCPage 140 BIOS Menu 13: PCI/PnP Configuration  IRQ# [Available] Use the IRQ# address to specify what IRQs can be assigned t

NOVA-945GSE 5.25” SBC Page 141 IRQ10  IRQ 11  IRQ 14  IRQ 15  DMA Channel# [Available] Use the DMA Channel# option to assign a specific DM

NOVA-945GSE 5.25” SBCPage 142 BIOS Menu 14: Boot 6.5.1 Boot Settings Configuration Use the Boot Settings Configuration menu (839HBIOS Menu 1586) to

NOVA-945GSE 5.25” SBC Page 143 BIOS Menu 15: Boot Settings Configuration  Quick Boot [Enabled] Use the Quick Boot BIOS option to make the computer

NOVA-945GSE 5.25” SBCPage 144  AddOn ROM Display Mode [Force BIOS] The AddOn ROM Display Mode option allows add-on ROM (read-only memory) message

NOVA-945GSE 5.25” SBC Page 145 Disabled DEFAULT Cannot be booted from a remote system through the LAN  Enabled DEFAULT Can be booted from a remote

NOVA-945GSE 5.25” SBCPage 146  Change User Password Use the Change User Password to set or change a user password. The default for this option is

NOVA-945GSE 5.25” SBC Page 1476.7.1 North Bridge Chipset Configuration Use the North Bridge Chipset Configuration menu (890H842HBIOS Menu 18) to con

NOVA-945GSE 5.25” SBCPage 148  Internal Graphics Mode Select [Enable, 8MB] The Internal Graphic Mode Select option determines the amount of system

NOVA-945GSE 5.25” SBC Page 149graphics memory. If more memory is needed, graphics memory is dynamically allocated according to the system and graphi

NOVA-945GSE 5.25” SBC Page 15225HFigure 7-1: Start Up Screen... 61

NOVA-945GSE 5.25” SBCPage 150 BIOS Menu 19:SouthBridge Chipset Configuration  Audio Controller [AC’97 Audio Only] The Audio Controller option ena

NOVA-945GSE 5.25” SBC Page 1516.8 Exit Use the Exit menu (893H844HBIOS Menu 20) to load default BIOS values, optimal failsafe values and to save con

NOVA-945GSE 5.25” SBCPage 152  Load Optimal Defaults Use the Load Optimal Defaults option to load the optimal default values for each of the param

NOVA-945GSE 5.25” SBC Page 153 7 Software Drivers Chapter 7

NOVA-945GSE 5.25” SBCPage 154 7.1 Available Software Drivers NOTE: The content of the CD may vary throughout the life cycle of the product and is s

NOVA-945GSE 5.25” SBC Page 155 Figure 7-1: Start Up Screen Step 3: Click NOVA-945GSE. Step 4: The screen in appears. Figure 7-2: Select Operating

NOVA-945GSE 5.25” SBCPage 156 manual describes the installation for a Windows XP operating system. Step 6: The list of drivers in 846HFigure 7-3 ap

NOVA-945GSE 5.25” SBC Page 157 Figure 7-4: Chipset Driver Screen Step 4: When the setup files are completely extracted the Welcome Screen in 850HFi

NOVA-945GSE 5.25” SBCPage 158 Step 6: The license agreement in 851HFigure 7-6 appears. Step 7: Read the License Agreement. Step 8: Click the Yes

NOVA-945GSE 5.25” SBC Page 159 Figure 7-7: Chipset Driver Read Me File Step 11: Setup Operations are performed as shown in 853HFigure 7-8.

NOVA-945GSE 5.25” SBCPage 16 List of Tables 250HTable 1-1: Technical Specifications ...

NOVA-945GSE 5.25” SBCPage 160 Figure 7-8: Chipset Driver Setup Operations Step 12: Once the Setup Operations are complete, click the Next icon to c

NOVA-945GSE 5.25” SBC Page 161 Figure 7-9: Chipset Driver Installation Finish Screen 7.4 VGA Driver Installation To install the VGA driver, please d

NOVA-945GSE 5.25” SBCPage 162 Figure 7-10: VGA Driver Read Me File Step 5: The installation files are extracted. See 858HFigure 7-11. Figure 7-11

NOVA-945GSE 5.25” SBC Page 163 Figure 7-12: VGA Driver Welcome Screen Step 7: Click Next to continue. Step 8: The license agreement in 860HFigure

NOVA-945GSE 5.25” SBCPage 164 Figure 7-13: VGA Driver License Agreement Step 11: The Read Me file in 861HFigure 7-14 appears. Step 12: Click Next t

NOVA-945GSE 5.25” SBC Page 165 Figure 7-15: VGA Driver Setup Operations Step 14: Once the Setup Operations are complete, click the Next icon to cont

NOVA-945GSE 5.25” SBCPage 166 7.5 LAN Driver Installation To install the chipset driver, please do the following. Step 1: Access the driver list sh

NOVA-945GSE 5.25” SBC Page 167 Figure 7-18: LAN Driver Welcome Screen Step 7: The program begins to install. Step 8: The installation progress can

NOVA-945GSE 5.25” SBCPage 168 Step 9: When the driver installation is complete, the screen in 869HFigure 7-20 appears.Step 0: Figure 7-20: LAN Dri

NOVA-945GSE 5.25” SBC Page 169 Figure 7-21: Audio Driver Options Step 4: Select “ALC655” in 873HFigure 7-21 Step 5: Locate the following directory

NOVA-945GSE 5.25” SBC Page 17278HTable 4-26: RJ-45 Ethernet Connector LEDs...667H84 279HTab

NOVA-945GSE 5.25” SBCPage 170 Figure 7-22: AC’97 Driver Installation Welcome Screen Step 8: The Verification window in 875HFigure 7-23 may appear.

NOVA-945GSE 5.25” SBC Page 171 Figure 7-24: AC’97 Driver Installation Step 11: When the driver is installed, the driver installation finish screen

NOVA-945GSE 5.25” SBCPage 172 A BIOS Menu Options Appendix A

NOVA-945GSE 5.25” SBC Page 173 311H　 System Overview... 878H1

NOVA-945GSE 5.25” SBCPage 174 341H　 CPU Temp. Limit of Start [020] ... 908H127 342H　

NOVA-945GSE 5.25” SBC Page 175372H　 Bootup Num-Lock [On]... 939H144 373

NOVA-945GSE 5.25” SBCPage 176 B Terminology Appendix B

NOVA-945GSE 5.25” SBC Page 177 AC ’97 Audio Codec 97 (AC’97) refers to a codec standard developed by Intel® in 1997. ACPI Advanced Configuration a

NOVA-945GSE 5.25” SBCPage 178 computer is usually a male DE-9 connector. DAC The Digital-to-Analog Converter (DAC) converts digital signals to anal

NOVA-945GSE 5.25” SBC Page 179MAC The Media Access Control (MAC) protocol enables several terminals or network nodes to communicate in a LAN, or ot

NOVA-945GSE 5.25” SBCPage 18 List of BIOS Menus 288HMenu 1: Main...

NOVA-945GSE 5.25” SBCPage 180 asynchronous communications on the system and manages the system’s serial communication (COM) ports. UHCI The Univers

NOVA-945GSE 5.25” SBC Page 181 C DIO Interface Appendix C

NOVA-945GSE 5.25” SBCPage 182 C.1 DIO Interface Introduction The DIO connector on the NOVA-945GSE is interfaced to GPIO ports on the ITE IT8718F Sup

NOVA-945GSE 5.25” SBC Page 183C.3 Assembly Language Samples C.3.1 Enable the DIO Input Function The BIOS interrupt call INT 15H controls the digital

NOVA-945GSE 5.25” SBCPage 184 D Watchdog Timer Appendix D

NOVA-945GSE 5.25” SBC Page 185 NOTE: The following discussion applies to DOS environment. IEI support is contacted or the IEI website visited for

NOVA-945GSE 5.25” SBCPage 186 NOTE: When exiting a program it is necessary to disable the Watchdog Timer, otherwise the system resets. Example pr

NOVA-945GSE 5.25” SBC Page 187 E Address Mapping Appendix E

NOVA-945GSE 5.25” SBCPage 188 E.1 I/O Address Map

NOVA-945GSE 5.25” SBC Page 189 Table E-1: IO Address Map

NOVA-945GSE 5.25” SBC Page 19 1 Introduction Chapter 1

NOVA-945GSE 5.25” SBCPage 190 E.2 IRQ Address Map Table E-2: IRQ Address Map

NOVA-945GSE 5.25” SBC Page 191E.3 Memory Address Map Table E-3: Memory Address Map

NOVA-945GSE 5.25” SBCPage 192 F Hazardous Materials Disclosure Appendix F

NOVA-945GSE 5.25” SBC Page 193F.1 Hazardous Material Disclosure Table for IPB Products Certified as RoHS Compliant Under 2002/95/EC Without Mercury

NOVA-945GSE 5.25” SBCPage 194 Toxic or Hazardous Substances and Elements Part Name Lead (Pb) Mercury (Hg) Cadmium (Cd) Hexavalent Chromium (CR(VI))

NOVA-945GSE 5.25” SBC Page 195此附件旨在确保本产品符合中国 RoHS 标准。以下表格标示此产品中某有毒物质的含量符合中国 RoHS 标准规定的限量要求。 本产品上会附有”环境友好使用期限”的标签，此期限是估算这些物质”不会有泄漏或突变”的年限。本产品可能包含有较短的

NOVA-945GSE 5.25” SBCPage 2 Revision Date Version Changes 12 March, 2009 1.01 Changed model name 7 November, 2008 1.00 Initial release

NOVA-945GSE 5.25” SBCPage 20 1.1 Overview Figure 1-1: NOVA-945GSE 1.1.1 NOVA-945GSE Introduction The NOVA-945GSE 5.25” motherboard is embedded 45 n

NOVA-945GSE 5.25” SBC Page 21Figure 1-2: NOVA-945GSE Overview [Front View] 698HFigure 1-3 shows the rear side of the NOVA-945GSE.

NOVA-945GSE 5.25” SBCPage 22 Figure 1-3: NOVA-945GSE Overview [Solder Side] 1.2.2 NOVA-945GSE Peripheral Connectors and Jumpers The NOVA-945GSE has

NOVA-945GSE 5.25” SBC Page 23 1 x Parallel port connector  1 x PC/104-Plus slot  2 x PCIe Mini Card slots  2 x Serial ATA (SATA) drive conne

NOVA-945GSE 5.25” SBCPage 24 Memory One 200-pin SO-DIMM socket supports one 533/400 MHz 2.0 GB (max.) DDR2 SDRAM SO-DIMM CompactFlash® One CompactFl

NOVA-945GSE 5.25” SBC Page 25Watchdog Timer Software programmable 1-255 sec. through the ITE super I/OInfrared One infrared connector through the IT

NOVA-945GSE 5.25” SBCPage 26 2 Detailed Specifications Chapter 2

NOVA-945GSE 5.25” SBC Page 272.1 Dimensions 2.1.1 Board Dimensions The dimensions of the board are listed below:  Length: 203 mm  Width: 146 mm

NOVA-945GSE 5.25” SBCPage 28 2.1.2 External Interface Panel Dimensions External peripheral interface connector panel dimensions are shown in 748H700

NOVA-945GSE 5.25” SBC Page 29 Figure 2-3: Data Flow Block Diagram 2.3 Embedded NOVA-945GSE Processor 2.3.1 Overview The NOVA-945GSE comes with an em

NOVA-945GSE 5.25” SBC Page 3Copyright COPYRIGHT NOTICE The information in this document is subject to change without prior notice in order to improv

NOVA-945GSE 5.25” SBCPage 30 Figure 2-4: Embedded Processor 2.3.2 Features Some of the features of the Intel® Atom™ processor N270 are listed belo

NOVA-945GSE 5.25” SBC Page 312.3.3 Front Side Bus (FSB) The Intel® Atom™ processor on the NOVA-945GSE is interfaced to the Intel® 945GSE through a 5

NOVA-945GSE 5.25” SBCPage 32 2.4 Intel 945GSE Northbridge Chipset 2.4.1 Intel® 945GSE Overview The Intel® 945GSE Graphics and Memory Controller Hub

NOVA-945GSE 5.25” SBC Page 332.4.3 Intel® 945GSE Graphics The Intel® 945GSE supports CRT, LVDS, TV-Out and SDVO. The internal graphics engine has th

NOVA-945GSE 5.25” SBCPage 34 2.4.3.1 Analog CRT Graphics Mode The analog CRT bus is interfaced to an on-board 10-pin connector. The connector is sho

NOVA-945GSE 5.25” SBC Page 352.5 Intel® ICH7-M Southbridge Chipset 2.5.1 Intel® ICH7-M Overview The Intel® ICH7-M chipset is connected to the Intel®

NOVA-945GSE 5.25” SBCPage 36 Figure 2-8: Audio Codec and Connectors Some of the features of the RealTek ALC655 are listed below:  Meets performan

NOVA-945GSE 5.25” SBC Page 372.5.2 Intel® ICH7-M IDE Interface The integrated IDE interface on the ICH7-M southbridge supports two IDE hard disks an

NOVA-945GSE 5.25” SBCPage 38 2.5.3 Intel® ICH7-M Low Pin Count (LPC) Interface The ICH7-M LPC interface complies with the LPC 1.1 specifications. Th

NOVA-945GSE 5.25” SBC Page 392.5.5 Intel® ICH7-M PCIe Bus The Intel® ICH7-M southbridge chipset has four PCIe lanes. Two of the four PCIe lanes ar

NOVA-945GSE 5.25” SBCPage 4 Manual Conventions WARNING! Warnings appear where overlooked details may cause damage to the equipment or result in per

NOVA-945GSE 5.25” SBCPage 40  Integrated 10/100/1000 transceiver  Auto-Negotiation with Next Page capability  Supports PCI Express™ 1.1

NOVA-945GSE 5.25” SBC Page 41 Figure 2-12: PCIe Mini Slots 2.5.6 Intel® ICH7-M Real Time Clock 256 bytes of battery backed RAM is provided by the Mo

NOVA-945GSE 5.25” SBCPage 42 Figure 2-13: SATA Connectors SATA controller specifications are listed below.  Supports four SATA drives  Supports

NOVA-945GSE 5.25” SBC Page 43 Figure 2-14: On-board USB Implementation 2.6 LPC Bus Components 2.6.1 LPC Bus Overview The ICH7-M LPC bus is connected

NOVA-945GSE 5.25” SBCPage 44 Figure 2-15: Super I/O The iTE IT8718F is an LPC interface-based Super I/O device that comes with Environment Controll

NOVA-945GSE 5.25” SBC Page 452.6.2.2 Super I/O 16C550 UARTs The on-board Super I/O has two integrated 16C550 UARTs that can support the following: 

NOVA-945GSE 5.25” SBCPage 46 2.6.2.7 Super I/O Parallel Port The multi-mode high-performance parallel port supports the bi-directional Standard Para

NOVA-945GSE 5.25” SBC Page 472.7.2 Operating Temperature and Temperature Control The maximum and minimum operating temperatures for the NOVA-945GSE

NOVA-945GSE 5.25” SBCPage 48 3 Unpacking Chapter 3

NOVA-945GSE 5.25” SBC Page 493.1 Anti-static Precautions WARNING! Failure to take ESD precautions during the installation of the NOVA-945GSE may re

NOVA-945GSE 5.25” SBC Page 5 NOTE: These messages inform the reader of essential but non-critical information. These messages should be read careful

NOVA-945GSE 5.25” SBCPage 50 3.3 Unpacking Checklist NOTE: If any of the components listed in the checklist below are missing, do not proceed with

NOVA-945GSE 5.25” SBC Page 511 VGA cable (P/N: 32000-033804-RS) 1 Mini jumper pack (2.0mm) (P/N: 33100-000033-RS) 1 Utility CD 1 Quick Instal

NOVA-945GSE 5.25” SBCPage 52 802.11 b/g PCIe mini card wireless LAN module with Atheros (P/N: WMPCIE-V01-R10) 802.11b/g USB embedded module with VI

NOVA-945GSE 5.25” SBC Page 53 4 Connectors Chapter 4

NOVA-945GSE 5.25” SBCPage 54 4.1 Peripheral Interface Connectors Section 718H4.1.1 shows peripheral interface connector locations. Section 719H4.3

NOVA-945GSE 5.25” SBC Page 55 Figure 4-2: Connector and Jumper Locations [Solder Side] 4.2 Peripheral Interface Connectors 769H723HTable 4-1 shows

NOVA-945GSE 5.25” SBCPage 56 Fan connector 3-pin wafer J1 Front panel connector 8-pin header F_PANEL1 IDE disk drive connectors (44-pin) 44-pin bo

NOVA-945GSE 5.25” SBC Page 57USB 2.0 connector 8-pin header USB2 USB 2.0 connector 8-pin header USB3 Table 4-1: Peripheral Interface Connectors 4.

NOVA-945GSE 5.25” SBCPage 58 Figure 4-3: AT Power Connector Location PIN NO. DESCRIPTION 1 +5V 2 GND 3 GND 4 +12V Table 4-3: AT Power Connector Pi

NOVA-945GSE 5.25” SBC Page 59 Figure 4-4: ATX Power Supply Enable Connector Location PIN NO. DESCRIPTION 1 +5V Standby 2 GND 3 PS-ON Table 4-4: AT

NOVA-945GSE 5.25” SBCPage 6 Packing List NOTE: If any of the components listed in the checklist below are missing, please do not proceed with the i

NOVA-945GSE 5.25” SBCPage 60 LILMICINLINEOUTR LIRLINEOUTLGND_AUDJ8PIN HEADER 2*51122334455667799881010Figure 4-5: Audio Connector Location (9-pin)

NOVA-945GSE 5.25” SBC Page 61 Figure 4-6: Panel Backlight Connector Pinout Locations PIN NO. DESCRIPTION 1 LCD Backlight Control 2 GROUND 3 +12V 4

NOVA-945GSE 5.25” SBCPage 62 Figure 4-7: CF Card Socket Location PIN NO. DESCRIPTION PIN NO. DESCRIPTION1 GROUND 26 VCC-IN CHECK1 2 DATA 3 27

NOVA-945GSE 5.25” SBC Page 63PIN NO. DESCRIPTION PIN NO. DESCRIPTION16 N/C 41 HDD_RESET 17 N/C 42 IORDY 18 SA2 43 SDREQ 19 SA1 44 SDACK# 20 SA

NOVA-945GSE 5.25” SBCPage 64 Figure 4-8: VGA Connector Pinout Locations PIN NO. DESCRIPTION PIN NO. DESCRIPTION 1 L_RED 2 DDC_CLK 3 L_GREEN 4

NOVA-945GSE 5.25” SBC Page 65 Figure 4-9: DIO Connector Connector Locations PIN NO. DESCRIPTION PIN NO. DESCRIPTION1 GND 2 VCC5 3 Output 3 4 Ou

NOVA-945GSE 5.25” SBCPage 66 Figure 4-10: +12V Fan Connector Location PIN NO. DESCRIPTION 1 GND 2 +12V 3 Fan Speed Detect Table 4-10: +12V Fan Co

NOVA-945GSE 5.25” SBC Page 67Figure 4-11: Front Panel Connector Pinout Locations (8-pin) FUNCTION PIN DESCRIPTION FUNCTION PIN DESCRIPTION1 PWR_

NOVA-945GSE 5.25” SBCPage 68 Figure 4-12: Secondary IDE Device Connector Locations PIN NO. DESCRIPTION PIN NO. DESCRIPTION 1 RESET# 2 GROUND 3

NOVA-945GSE 5.25” SBC Page 6941 VCC 42 VCC 43 GROUND 44 N/C Table 4-12: Secondary IDE Connector Pinouts 4.3.11 Infrared Interface Connector (5-pin

NOVA-945GSE 5.25” SBC Page 7Table of Contents 1H1 INTRODUCTION...

NOVA-945GSE 5.25” SBCPage 70 4.3.12 Keyboard/Mouse Connector CN Label: KB1 CN Type: 6-pin wafer (1x6) CN Location: See 749HFigure 4-14 CN Pinouts:

NOVA-945GSE 5.25” SBC Page 714.3.13 LVDS LCD Connector CN Label: LVDS1 CN Type: 30-pin crimp (3x10) CN Location: See 789H751HFigure 4-15 CN Pinou

NOVA-945GSE 5.25” SBCPage 72 9 LVDSACLK+ 10 LVDSACLK- 11 NC 12 NC 13 GND 14 GND 15 LVDSB1+ 16 LVDSB1- 17 LVDSB2+ 18 LVDSB2- 19 LVDSB3+ 20 LVDSB3-

NOVA-945GSE 5.25” SBC Page 73Figure 4-16: Parallel Port Connector Location PIN NO. DESCRIPTION PIN NO. DESCRIPTION 1 STROBE 14 ALF 2 PD0 15 ERR

NOVA-945GSE 5.25” SBCPage 74 4.3.15 SDVO Connector CN Label: CN3 CN Type: 47-pin connector (1x47) CN Location: See 755HFigure 4-17 CN Pinouts: Se

NOVA-945GSE 5.25” SBC Page 75 PIN NO. DESCRIPTION PIN NO. DESCRIPTION 1 GROUND 25 GROUND 2 SDVOC_CLK- 26 SDVOB_BLUE- 3 SDVOC_CLK+ 27 SDVOB_BLUE+

NOVA-945GSE 5.25” SBCPage 76 4.3.16 SATA Drive Connectors CN Label: SATA1 and SATA2 CN Type: 7-pin SATA drive connectors CN Location: See 793H757H

NOVA-945GSE 5.25” SBC Page 774.3.17 SATA Power Connectors CN Label: CN1 and CN2 CN Type: 2-pin wafer CN Location: See 793H759HFigure 4-19 CN Pinou

NOVA-945GSE 5.25” SBCPage 78 The 10-pin serial port connector provides a RS-232 serial communications channel. The COM serial port connectors can be

NOVA-945GSE 5.25” SBC Page 79TX_422-TX_422+ RX3+RX3-JP2HEADER_2X3_21 23 45 6D+ D-Figure 4-21: COM 3 RS-422/485 Connector Pinout Locations PIN NO.

NOVA-945GSE 5.25” SBCPage 8 31H2.5.5.1 PCIe GbE Ethernet... 420H39

NOVA-945GSE 5.25” SBCPage 80 Figure 4-22: TPM Connector Pinout Locations PIN NO. DESCRIPTION PIN NO. DESCRIPTION 1 LCLK 2 GND2 3 LFRAME# 4 KEY

NOVA-945GSE 5.25” SBC Page 814.3.21 TV Out Connector CN Label: TV1 CN Type: 6-pin header (2x3) CN Location: See 799H768HFigure 4-23 CN Pinouts: S

NOVA-945GSE 5.25” SBCPage 82 4.3.22 USB Connectors (Internal) CN Label: USB1, USB2 and USB3 CN Type: 8-pin header (2x4) CN Location: See 801H770

NOVA-945GSE 5.25” SBC Page 834.4 External Peripheral Interface Connector Panel 803H772HFigure 4-25 shows the NOVA-945GSE external peripheral interfa

NOVA-945GSE 5.25” SBCPage 84 Figure 4-26: RJ-45 Ethernet Connector The RJ-45 Ethernet connector has two status LEDs, one green and one yellow. The

NOVA-945GSE 5.25” SBC Page 85 5 Installation Chapter 5

NOVA-945GSE 5.25” SBCPage 86 5.1 Anti-static Precautions WARNING: Failure to take ESD precautions during the installation of the NOVA-945GSE may re

NOVA-945GSE 5.25” SBC Page 875.2 Installation Considerations NOTE: The following installation notices and installation considerations should be re

NOVA-945GSE 5.25” SBCPage 88 o When working with the NOVA-945GSE, make sure that it is disconnected from all power supplies and that no electricity

NOVA-945GSE 5.25” SBC Page 895.3 Unpacking When the NOVA-945GSE is unpacked, please check all the unpacking list items listed in Chapter 3 are indee

NOVA-945GSE 5.25” SBC Page 964H4.3.2 ATX Power Supply Enable Connector... 453H58 65H4.3.3

NOVA-945GSE 5.25” SBCPage 90 Step 2: Align the SO-DIMM with the socket. The SO-DIMM must be oriented in such a way that the notch in the middle of

NOVA-945GSE 5.25” SBC Page 91 Figure 5-2: CF Card Installation 5.5 Jumper Settings NOTE: A jumper is a metal bridge used to close an electrical c

NOVA-945GSE 5.25” SBCPage 92 Description Label Type AT Power Mode Setting ATXCTL1 2-pin header CF Card Setting J_CF1 2-pin header Clear CMOS

NOVA-945GSE 5.25” SBC Page 93 Figure 5-4: AT Power Select Jumper Location 5.5.2 CF Card Setup Jumper Label: J_CF1 Jumper Type: 2-pin header Jumper

NOVA-945GSE 5.25” SBCPage 94 Figure 5-5: CF Card Setup Jumper Location 5.5.3 Clear CMOS Jumper Jumper Label: J_CMOS1 Jumper Type: 3-pin header Jum

NOVA-945GSE 5.25” SBC Page 95After having done one of the above, save the changes and exit the CMOS Setup menu. The clear CMOS jumper settings are

NOVA-945GSE 5.25” SBCPage 96 The COM 3 Function Select jumper sets the communication protocol used by the third serial communications port (COM 3) a

NOVA-945GSE 5.25” SBC Page 97J_LCD_TYPE1 Description Open 640 x 480 (18-bit) Short 1-2 800 x 480 (18-bit) Short 3-4 800 x 600 (18-bit) Short 1-2

NOVA-945GSE 5.25” SBCPage 98 5.5.6 LVDS Voltage Selection WARNING: Permanent damage to the screen and NOVA-945GSE may occur if the wrong voltage is

NOVA-945GSE 5.25” SBC Page 99 Figure 5-9: LVDS Voltage Selection Jumper Pinout Locations 5.6 Chassis Installation 5.6.1 Airflow WARNING: Airflow is